A brick-red StreetPrint roundabout apron under a clear sky in Maple Ridge, installed by Square One
BC’s decorative pavement studio · Since 2000

Surfaces that define a place

Maple Ridge · StreetPrint01 / 05

01Applications

Where these systems are specified

Every photograph, by application
02What we do

Three ways we change a surface, and one way we clean it

All services
  1. 01Stamped asphalt

    Pattern it

    Brick, cobble or slate, pressed into the asphalt that is already there.

  2. 02Preformed thermoplastic

    Mark it

    Crosswalks, symbols and street art, cut to the drawing and fused into the road.

  3. 03Decorative coatings

    Colour it

    Bike lanes, plazas, spray parks and courts, in colour that holds under traffic.

  4. 04Vapour blasting

    Clean it

    Graffiti, old markings and grime lifted wet, with no damage to the surface under them.

  • Standard Herringbone
  • Offset Brick
  • Ashlar Slate
03Patterns and colours

Specified from a drawing, matched from a card

Every stamped pattern begins as a dimensioned template sheet, and every colour has a published name on the coating chart — so a landscape architect can draw it, an engineer can specify it and the finished surface matches both. The sample boards come to the site visit, because a drawing is not a casting.

Since 2000

Twenty-five years on BC ground

The work

Ten kinds of work across the Lower Mainland and Vancouver Island, each with its own gallery.

A red-brown brick-pattern StreetPrint driveway in front of a stucco bungalow in Richmond, installed by Square One
Richmond · StreetPrint
Metro Vancouver

Vancouver driveways

On record from West Vancouver and Richmond to New Westminster, Surrey, Langley and Maple Ridge.

604-612-6209
Grey ashlar StreetPrint stamped asphalt driveway with a charcoal border, running up to a stone-and-timber entry at Ten Mile Point, Saanich
Ten Mile Point, Saanich · StreetPrint
Greater Victoria

Victoria driveways

On record from Victoria, Saanich, the Peninsula, Sooke and the Cowichan Valley.

250-391-0270
05Driveways · Vancouver & Victoria

The driveway you already have, made to look like stone

StreetPrint patterns pressed into your existing asphalt and sealed in StreetBond colour — one continuous surface, no joints to heave, nothing for weeds to take hold in. Installed by the same crews that do our municipal work, on both sides of the Strait.

Free site visit

We walk it before we quote it

We assess the asphalt on site, bring colour and pattern samples, and come back with a written quote. No demolition, no new base.

The manufacturer publishes a 10–20 year service life for StreetPrint under municipal traffic. The manufacturer warrants the material; Square One warrants the workmanship.

The same face-brick wall after vapour blasting — clean brick, mortar joints intact

Demonstration · aerosol graffiti off face brick · drag the line

06Vapour blasting

Graffiti and old markings, lifted wet

The abrasive travels in water, so the paint comes off and the dust stays on the ground — no dust cloud, no chemical residue, and the brick, stone, concrete or steel underneath is left as it was. One mobile rig, both regions: graffiti, mould, paint, road markings, and the priming before a coating goes down.

  • Graffitioff brick, stone, concrete and steel
  • Markingsold lines and legends off asphalt and concrete
  • Surface prepcleaned and primed before a coating
07Recently written

Project stories and guides

All stories and guides
Roundabouts

The Brick Roundabout That Solved a Junction

April 18, 2026
Residential

BC Driveways Done Right: What to Expect from a Premium Paving Install

March 30, 2026
Bike Lanes

Why Green Means More Than Visibility

March 11, 2026

Start a project

Let’s build something worth looking at

Send a few photos, a site address or drawings. We walk the site before we quote it — Lower Mainland and Vancouver Island, free.